This document details some of the less readily obvious changes that have been made to the TRNSYS source code in upgrading to version 15. If you have any questions or comments, please feel free to contact us by emailing trnsys@sel.me.wisc.edu 

*-*-*-*-* Modified Types *-*-*-*-*

Type1 - Solar Collector: In TRNSYS 14.2 Type1 had four modes, each of which represented a different type of solar collector. These modes were broken up into separate Types (71-74) for ease of use.

Type2 - On/Off Differential Controller: The dead band temperatures for the controller were moved from PARAMETERS 2 and 3 to INPUTS 5 and 6.

Type5 - Heat Exchanger: The constant effectiveness heat exchanger was moved to Type91. The UA PARAMETERS was moved to an INPUT.

Type6 - Auxiliary Heater: The heat set point temperature was moved from a parameter to an input

Type9 - Data Reader: The data reader was split into two Types. Type9 reads ASCII text files as before but now can output up to 98 values. Type89 takes over for TRNSYS TMY files. Furthermore, there can now be up to 10 data readers in a given simulation.

Type16 - Radiation Processor: Beam radiation on the horizontal was added as an output. The number of surfaces for which the radiation processor will calculate outputs was augmented from 4 to 8. Slope, incidence angle, total, diffuse, and beam radiation are output for all surfaces.

Type28 - Simulation Summary: 15 simulation summaries are now allowed in a given simulation 

Type65 - Online Plotter: There can now be up to 5 online plots in a simulation, each having up to 20 traces. The online plotter writes all its values to a file if desired. Thick lines can be displayed on the online and the online remembers which traces are switched on and which are switched off from run to run.


*-*-*-*-* New Types *-*-*-*-*

Type61 - calls a user specified DLL as a TRNSYS type

Type66 - Calls EES programs as a TRNSYS type

Type70 - Replaces specified PARAMETERS with the values from a text file instead of those given in the .dck file.

Type71 - Evacuated tube solar collector

Type88 - Models a lumped capacitance building

Type89 - Reads TRNSYS TMY, TMY2 and EnergyPlus weather files.

Type90 - models a wind turbine

Type92 - An auxiliary cooling device that works in much the same manner as the Type6 auxiliary heating device.

Type93 - Recalls the values of specified inputs over a specified number of timesteps.

Type94 - Photovoltaic array

Type95 - Outputs whether the current day in the simulation is a weekday, weekend or holiday. Can output standard American holidays or can read holidays from a file.

Type96 - Reads utility rate schedule files and determines the cost of electricity being demanded by the system on an hourly basis.


*-*-*-*-* Miscellaneous Changes *-*-*-*-*

The CALLPROGRAM utility allows TRNSYS to call another program at every timestep, wait for the program to complete a task, and then continue.

Decks may now be up to 160 characters wide

Inline comments are now allowed. Anything following an exlamation point (!) will be ignored by TRNSYS.